Carrier Access Broadmore 1750 - Manual (Page 331)

Broadmore 1750 - Release 4.6 12-13
SNMP Configuration
Groups
Groups
The VACM model supports the concept of categorizing users into groups. A group is
a unique pair defined by the parameters “User Name” and “Security Model” (see table
below). The screen below shows the four predefined groups.
Follow the sequence below to modify the list.
Select System Management
↵
Select Configuration
↵
Select System Services
↵
Select SNMP Configure
↵
Select one of the following:
* Edit
↵,
edit the Group information
* Copy
↵,
(to put a copy of the information into the list)
* Delete
↵
, delete an existing Group
* New
↵,
enter a new Group
With each selection, confirm your changes and press Esc to exit.
Select Groups
↵
* Validate Table
↵,
check table entries for consistency