Carrier Access Broadmore 1750 User Manual
Page 288
11-22
Broadmore 1750 - Release 4.6
Security Management (FIPS Mode)
Enabling SecurID
Setting up the first CPU
2. Using an SSH terminal emulator, log into the online CPU and ensure that the
Broadmore is operating in FIPS mode (see “Help About Security” on
page
). If FIPS mode is not enabled, follow the procedure in “Enabling
to turn on FIPS mode and then reboot the
Broadmore.
3. On the SecurID server, create an Agent Host for the Broadmore and a
sdconf.rec file.
4. Using SFTP software, put the sdconf.rec file into the securid directory of the
Broadmore’s online CPU.
5. Using the CAMMI Administration / Security menu, select SecurID and press
the space bar choose Enable. Select SecurID Interface and press the space bar
to choose Ethernet. (See figure below.)
6. If the step 5 was successful, the first CPU is set up correctly and you are ready
to use SecureID with that CPU. If step 5 was not successful, do not proceed
until the problem is fixed.