Carrier Access Broadmore 1750 - Manual (Page 343)

Broadmore 1750 - Release 4.6 12-25
SNMP Configuration
Communities
NOTE: Selecting the Validate command on this table will check each
“User Name” value for existence in the “usmUserTable” and check each
Tag Name for existence in the “snmpNotifyTable”.
NOTE:
So that the Broadmore properly registers with the ATM Switch,
the Broadmore automatically creates an “ILMI” community with predefined
Views, Users, Groups, and Access. These properties are read-only.
ILMI (Interim Local Management Interface) is an independent industry
standard used for configuration of ATM interfaces. Although it is based on
SNMP, ILMI communication actually occurs using a transport other than IP
that traverses only the physical ATM link. ILMI is essential to functions such
as ATM auto-discovery and LANE (LAN Emulation).
Use the Esc key to exit this menu. If you have made any changes to the Community
information the system will ask you for confirmation on whether you want to
accept the changes or not.