Carrier Access Broadmore 1750 - Manual (Page 169)

Broadmore 1750 - Release 4.6 7-55
Configuration
Structured DS3 SAM
Table 7-11 : Structured DS3 SAM DS1 Tributary Configuration
Service Alarm Definition
Excessive F-bit Errors The Excessive F-bit Errors alarm is triggered when the DS3 port receives
F-bit errors at a rate of 1 x 10
-4
Excessive Parity Errors The Excessive Parity Errors alarm will be triggered when the DS3 port
receives parity errors at a rate of 1 x 10
-4
Excessive C-bit Errors The Excessive C-bit Errors alarm will be triggered when the DS3 port
receives C-bit errors at a rate of 1 x 10
-4
Excessive FEBE Errors The Excessive FEBE (Far End Block Error) alarm is triggered when the DS3
port receives FEBEs at a rate of 1 x 10
-4
Item Options Description
Timing Recovery
Service Clocking Mode
SRTS Timing
Synchronous Network
Synchronous Loop Each option specifies a method of clock recovery
that will be used for all recovery circuits on the
port.
NOTE: SRTS is a proprietary timing
algorithm and may ONLY be used with
specific written prior permission from
Carrier Access Corporation. Additional
license fees may apply.
Loopback Normal
Remote Normal Mode is no loopback.
Remote Loopback sets a loopback to the service
side.