Carrier Access Broadmore 1750 - Manual (Page 361)

Broadmore 1750 - Release 4.6 12-43
SNMP Configuration
Notify Profiles
NOTE: Selecting Validate Table will check that each Parameter Name
in this table exists in the Target Parameters table.
The only reason for this table is to allow more than one notify filter with the same
Profile Name and different subtree, so that “profile_name” + “subtree” is the key into
the Notify Filter table. When a “profile_name” is found in the Notify Profiles table, the
Notify Filter table is searched for all entries having the same “profile_name”.
The following table describes the selections.
Item Options Comments
Profile Name string Value for Profile Name, 1 to 30 characters.
Parameter Name string Value for Parameter Name, 1 to 30 characters.
Note: This entry must agree with the Parameters
Name in the Target Parameters table (see “Target
Parameters” on page
12-35 ).
Enabled Enabled
Disabled Enables/disables this profile.
Storage Volatile
Non-volatile
Permanent
Readonly
Other Settings lost without power.
Settings remembered after reboot.
Settings can not be deleted.
Settings can not be changed.