Carrier Access Broadmore 1750 - Manual (Page 249)

Broadmore 1750 - Release 4.6 10-5
Security Management
Logging In
Logging In
The following example uses the Windows telnet client software.
To log into the Broadmore:
1. Open a telnet window.
2. Type in the Hostname and Username. The Hostname is the IP address of the
Broadmore, and the Username is admin.
3. Select Keyboard Interactive from the Primary pull-down menu in the
Authentication panel.
4. Click Connect.
NOTE:
For initial system installation, the factory default user name is
SYSADMIN and the password is INITIAL. To ensure network security, a
network administrator (SuperUser) must create new user names and
passwords. See “Managing Users and Audit Trails” on page
10-10 .
5. When Broadmore user login message displays, type the Login and Password.
You will need to press Enter after each.
After successfully logging into the Broadmore user’s list, the Broadmore
command prompt displays.