Carrier Access Broadmore 1750 - Manual (Page 354)

12-36 Broadmore 1750 - Release 4.6
SNMP Configuration
Target Parameters
NOTE: Selecting Validate Table will check that each Parameter Name
in this table exists in the Notify Profiles table.
The following table describes the selections.
Item Options Comments
Parameter Name string Value for Parameter Name, 1 to 30 characters.
Note: This entry must agree with the Parameters
Name in the Notify Profiles table (see “Notify
Profiles” on page
12-42 ).
User Name string Value for User Name, 1 to 30 characters.
Security Model V1
V2
USM The Security Model used in processing an SNMP
query from a client. This parameter can be used to
restrict access to the managed objects based on the
security model set for a group.
Security Level None
AuthnoPriv
AuthPriv None – the incoming request requires no
authentication or encryption.
AuthnoPriv – authentication is required but SNMP
messages will not be encrypted.
AuthPriv – authentication is required and SNMP
messages are encrypted.
MP Model V1
V2
V3 Message Processing model
Enabled Enabled
Disabled Enables/disables this target parameter.
Storage Volatile
Non-volatile
Permanent
Readonly
Other Settings lost without power.
Settings can be changed.
Settings can not be deleted.
Settings can not be changed.