Carrier Access Broadmore 1750 - Manual (Page 276)

11-10 Broadmore 1750 - Release 4.6
Security Management (FIPS Mode)
Logging in with SecurID Disabled
3. Type in the Hostname and Username. The Hostname is the IP address of the
Broadmore, and the Username is the Broadmore user name.
4. Click Connect.
5. When the Broadmore Login message appears, type in the Login and Password.
You will need to press Enter after each. (The factory defaults for the initial
installation are SYSADMIN and INITIAL.)
After successfully logging in, the Broadmore command prompt displays.