Carrier Access Broadmore 1750 - Manual (Page 305)

Broadmore 1750 - Release 4.6 11-39
Security Management (FIPS Mode)
resetSecurID
resetSecurID
A SuperUser (Crypto Officer) can use the resetSecurID command to reset the node
secret file. This command is necessary if the system administrator has, for example,
changed the server and needs to get a fresh node secret file.
At the Broadmore> prompt, type resetSecurID as shown in the following figure, and
then press Enter.
The node secret file resets, and the screen returns to the prompt. There is no output with
this command.