Carrier Access Broadmore 1750 - Manual (Page 3)

P
REFACE
Preface
Compliance
FCC Requirements, Part 15
This equipment has been tested and found to comply with the limits for a Class A digital device
pursuant to Part 15 of the Federal Communications Rules. These limits are designed to provide
reasonable protection against harmful interference when equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy, and if not
installed and used in accordance with the instruction manual may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful
interference, in which case the user will be required to correct the interference at the user’s own
expense.
WARNING! T O MEET FCC P ART 15 C LASS A RADIATED EMISSIONS
REQUIREMENTS , YOU MUST FOLLOW SPECIFIC INSTALLATION REQUIREMENTS
GIVEN FOR EACH MODULE USED IN THIS CHASSIS WHICH ARE PROVIDED IN THE
M ODULE I NSTALLATION SECTION . F OR MORE INFORMATION ABOUT INSTALLING
CABLES ACCORDING TO FCC P ART 15 C LASS A, FOLLOW THE INSTRUCTIONS
IN “Cabling and Compliance Requirements” on page 6-4 .
Common Criteria Evaluation and Validation Scheme (CCEVS) issued
Validation Report number CCEVS-VR-06-0039, 26 June 2006, for EAL
3 Conformance for the Carrier Access Broadmore 500, 1700, and 1750
Release 4.1.1. This report is maintained on the NIAP Validated Products
List (VPL) at
http://niap.bahialab.com/cc-scheme/.