Rack mounting procedure, Rack mounting procedure -6, Danger – Carrier Access Broadmore 1750 User Manual
Page 78: Warning
4-6
Broadmore 1750 - Release 4.6
Chassis Installation and Grounding
Rack Mounting Procedure
Rack Mounting Procedure
Rack-mounting the Broadmore 1750 chassis requires:
two technicians
clear access to front and rear of rack
user-provided rack mounting hardware (screws)
DANGER!
E
XERCISE
NORMAL
PRECAUTIONS
FOR
LIFTING
HEAVY
OBJECTS
. U
SE
TWO
PEOPLE
TO
LIFT
THE
B
ROADMORE
1750. W
HEN
LIFTING
,
SUPPORT
IT
FROM
THE
BOTTOM
AND
TAKE
CARE
TO
AVOID
SHARP
EDGES
OR
CORNERS
.
WARNING!
T
HE
FRONT
AND
REAR
COVERS
OF
THE
CHASSIS
MUST
REMAIN
ATTACHED
TO
PREVENT
THE
CHASSIS
FROM
BENDING
DURING
THE
RACK
-
MOUNTING
PROCEDURE
.
Perform the following steps:
1. Ensure that the front and rear chassis covers are firmly attached to provide
mechanical support and prevent accidental damage.
2. Carefully lift the Broadmore 1750 and position it in the desired rack location.
One technician should support the rear and the second should support the front.
3. Ensure that there is a 1.75 inch space above the chassis for adequate air flow.
4. Insert screws through the chassis and rack mounting holes. Every bracket hole
must have a screw securely installed to ensure proper weight distribution and
support.