Broadmore modules, Oc-12c network interface modules (nims), Ds3 (t3) structured circuit emulation sam – Carrier Access Broadmore 1750 User Manual
Page 368
A-6
Broadmore 1750 - Release 4.6
Technical Specifications
Broadmore Modules
Broadmore Modules
OC-12c Network Interface Modules (NIMs)
SONET/ SDH OC-12c/ STM-4c 622.08 Mbps: network synchronization
Single mode and multi-mode options
Optical connectors type: SC
Premise Reach:
Type - multi-mode
Wavelength - 1300 nm
Tx Output power - greater than or equal to –18.0 dBm
Rx sensitivity - less than or equal to –28.0 dBm
Intermediate Reach:
Type - single-mode
Wavelength - 1300nm
Tx Output power - greater than or equal to –11.0 dBm
Rx sensitivity- less than or equal to –28.0 dBm
DS3 (T3) Structured Circuit Emulation SAM
1 port per card
BNC connector access on rear panel IOM
CES Version 2 (AAL1) and ITU-T recommendation I.363:
Structured (N x 64) DS3: (1 to 672 ATM PVCs or SVCs per port)
DS3 options: C Bit parity, M13
Clocking: Network, BITS, Adaptive, SRTS, Loop
NOTE:
SRTS is a proprietary timing algorithm and may ONLY be used
with specific written prior permission from Carrier Access Corporation.
Additional license fees may apply.