Carrier Access Broadmore 1750 - Manual (Page 174)

7-60 Broadmore 1750 - Release 4.6
Configuration
Unstructured E3-3 SAM
Table 7-15: Unstructured E3-3 SAM Alarm Configuration
Follow the sequence below to set network alarms. E3 alarms are set on a port basis with
alarm definitions as shown.
Network Alarms Options Service Alarms
Cell Starvation Ignore/Major/Minor LOS
LOF Ignore/Major/Minor LOF
AIS Ignore/Major/Minor AIS
RDI Ignore/Major/Minor RDI
Sequence Errors Ignore/Major/Minor Line Code Violation
Excessive SNP Errors Ignore/Major/Minor Excessive F-bit Errors
Excessive F-bit Errors Ignore/Major/Minor Excessive Parity Errors
Excessive Parity Errors Ignore/Major/Minor Excessive FEBE Errors
Excessive FEBE Errors Ignore/Major/Minor
Select System Management
↵
Select Configure
↵
Select Slot with DS3
↵
Select Port of interest
↵
Adjust settings using the spacebar
↵
Select Alarm Configuration
↵
Select Network Alarms
↵
Select Escape and save settings as desired
↵
Press Service Alarms
↵
Repeat the procedure to set and save Service Alarms
↵