Carrier Access Broadmore 1750 - Manual (Page 185)

Broadmore 1750 - Release 4.6 7-71
Configuration
System Configuration
Restore Configuration
Select Restore Configuration to restore a previously saved configuration as
shown below.
The Restore Configuration results in the tear-down of all calls, configuration of all
modules, and establishment of all calls found in the named configuration. The UNI
must be UP to restore a configuration file containing one (or more) SVC. Follow
the sequence below to check UNI status. If necessary, configure UNI before
restoring the configuration.
Delete Configuration
Follow the selection sequence below to delete the current configuration. Answer
Yes to the confirmation notice. Use caution as this configuration cannot be restored
once it has been deleted
Select System Management
↵
Select Monitor Activity
↵
Select Connections
↵
Select UNI Status
↵
Select System Management
↵
Select Configuration Files
↵
Select Delete Configuration
↵