Paxar Monarch 9850 - Manual (Page 114)

Example R,3,S,"ABC1234567890" p
Restricts the field data to letters A, B, and C, and all digits.
Example R,3,T,"***#_ _ _ _" p
Creates a template that allows any printable character in
positions 1, 2, and 3; digits in position 4; and reserves positions 5
through 8 for fixed or copied data.
Example R,3,T,"####_ _ _ _" p
Creates a template that allows digits only in positions 1-4, and
reserves positions 5 through 8 for fixed or copied data.
O p t i o n 4 ( C o p y D a t a )
You can create a field that uses data from another field. This is
useful for creating merged fields or sub-fields. You can copy the
information from multiple fields into one field by applying the copy
procedure more than once. Copy data is the only option you can
apply to a field more than once.
The maximum number of characters defined in box T3 or B3 must
allow for the number of characters you will place in the field,
including any price, check digit, or fixed characters inserted by
the printer. The maximum number of characters in the field into
which data is copied cannot exceed 2710 (or 100 for the 9403
printer) or the maximum number of characters permitted by the
bar code.
To copy from or copy data into an RFID Data Field, see "Applying
Options to the RFID Data Field" in Chapter 3 for more information.
When copying from more than one field, copy
into the destination field from left to right.
4-6 Defining Field Options