Paxar Monarch 9850 - Manual (Page 130)

U s i n g C h e c k D i g i t s
Check digits are typically used to ensure that a text or bar code
field scans correctly. If you apply Option 31, the printer
calculates a check digit. A check digit scheme determines how
the printer calculates a check digit. When you define a check
digit scheme, you assign a number to identify it. This number is
later entered in box R4 when you apply Option 31 to a field. You
can use check digits with text or bar code fields. Check digit
calculations are performed on numeric data only.
Do not use check digits with price fields. Do not define a check
digit scheme for these bar codes, because they have predefined
check digits: UPC, EAN, Code 39 (with the MOD43 check digit),
and Code 93.
Syntax {A,selector,action,device,modulus,
fld_length,D/P,"weights"
p }
A1. A Check Digit Header.
A2. selector Assign a number from 1-10 to this check digit formula.
A3. action Adds a check digit scheme. Enter A.
A4. device Device. Options:
F Flash (must be formatted first. See "Formatting Flash" and
"Flash Memory Guidelines" in Chapter 2 for more
information.)
R Volatile RAM
NOTE: Check digits stored in flash are saved when the
printer is turned off.
A5. modulus Number from 2-11. The modulus is used to divide the sum of
products or the sum of digits.
A6. fld_length The maximum number of characters the field will contain.
Range: 0 - 2710 (0 - 100 for 9403).
A7. D/P Algorithm. The algorithm determines how the check digit is
calculated. Options:
D sum of digits
P sum of products
4-22 Defining Field Options