Paxar Monarch 9850 - Manual (Page 143)

(row 1,position 50) Z
(row 2,position 39) KzI
(row 3,position 34) EzsF
(row 4,position 30) DpZoD
.
.
If the end of the line specifies OFF dots
(lower-case letters), the ending lower-case
letters can be omitted. For example, uZFu
can be written as uZF.
4. Repeat steps 1 through 5 for each row on the grid.
5. Insert the code values in syntax format.
D e t e r m i n i n g H o w t o S t o r e t h e I m a g e
Once you have mapped out your graphic image, determine how
you want to store it. You have several options:
◆ Flash
◆ Non-volatile RAM
◆ Volatile RAM
◆ Temporary Storage
U s i n g F l a s h
Flash memory is available on all the printers. You can use flash
memory when the graphic image is used by several formats,
because you only have to send the graphic image once. This
eliminates the need to send the graphic image repeatedly. See
"Placing the Graphic in a Format," for more information about
using the graphic packet in a format. For the 9800 series
printers, you must format flash memory before you can use it.
From the Main Menu, select Setup, Flash Memory, then, Format
Flash. The process takes a few minutes. Graphics stored in
flash memory are saved when the printer is turned off. You
may need to clear flash memory, refer to your Operator’s
Handbook.
Creating Graphics 5-9