Paxar Monarch 9850 - Manual (Page 89)

Field placement in the packet is an important consideration
when using field color attributes, because fields are imaged in
the order they are received. If a line field is defined before
the overlay (text or constant text) field, the line field is
blocked out by the overlay field, depending on the overlay
field’s color attribute. If a line field is defined after the overlay
field, the line field is not blocked out by the overlay field,
regardless of the overlay field’s color attribute.
C9. alignment Alignment of constant text in the field. Options:
L Align on left side of field.
B Align at midpoint of field
E Align at end of field.
Use L, B, or E for any font.
C10. char rot Character rotation. Options:
0 Top of character points to top of field
(Use for scalable font.)
1 Top of character points to left of field
2 Top of character points to bottom of field
3 Top of character points to right of field
NOTE: Font 50 and downloaded TrueType fonts do not
support character rotation.
C11. field rot Field rotation. Lower left corner of field is the pivot point.
Options:
0 Top of overlay points to top of supply
1 Top of overlay points to left of supply
2 Top of overlay points to bottom of supply
3 Top of overlay points to right of supply
NOTE: Rotation is affected by the pivot point, which varies
depending on how text is justified.
C12. "fixed char" Fixed characters to appear in the field. Maximum 2710 (100
for 9403) characters. Enclose in quotation marks.
Defining Fields 3-23