Paxar Monarch 9850 - Manual (Page 186)

The following syntax is the response for a Job 4 request.
Syntax {J,printed,total,"FMT-1","BCH-2"}
printed the number of tags or labels already printed
in the batch.
total the total number of tags or labels to be
printed in the current batch.
"FMT-1/BCH-2" The format or batch number is returned.
Example {J,8,25,"FMT-3","Bch-2"}
8 out of 25 tags or labels have been printed from format number 3.
Use a Job Request 4 when printing in the on-demand mode with a
large number of tags or labels from a single batch. A Job
Request 4 may not be accurate if tags or labels are printed in
continuous mode, because of the response time involved. A Job
Request 4 is not useful in single ticket batches (printing 1 of 1) or
multiple single ticket batches.
A batch has to be printing when you send the
job request. You cannot use this job
request on batches printing formats with
incrementing fields.
7-12 Status Polling