Paxar Monarch 9850 - Manual (Page 141)

3. One row at a time, convert each group of eight binary digits to
hex values, using the binary to hex conversion chart found in
Appendix C.
starting at position 49 ...
00111111 = 3F
11111111 = FF
11111111 = FF
11110000 = F0
4. Write the hex values for each row as a continuous string.
row 1, position 49 = 03FFFFFF00000
All hex numbers must be two digits. For
example, write hex 0 as 00, or hex E as 0E.
5. Repeat steps 3 through 4 for each row on the grid.
6. Insert the hex values in syntax format.
U s i n g t h e R u n L e n g t h E n c o d i n g M e t h o d
The following steps explain how to derive a run length character
string from a bitmapped graphic.
Each square on the grid represents a dot. A black square
indicates the dot is ON, and a white square indicates the dot is
OFF.
For visual clarity, the following example
shows "1" to indicate when a square is ON,
and "0" to indicate when a square is OFF.
You do not have to convert your dots when
using the run length method.
Creating Graphics 5-7