Paxar Monarch 9850 - Manual (Page 147)

W i t h i n a F o r m a t
When you define the graphic field within your format, the row and
column parameters represent where on the format to place the
graphic image.
If you are doing a compliance label, these numbers are usually
0,0, because your compliance label covers the entire supply. See
"Placing the Graphic in a Format," for a sample compliance label.
If you are placing a graphic (a
logo, for example) within a
certain area on your supply,
enter the starting position
(bottom left corner) of the
graphic image.
This label shows the triangle
"logo" beginning (the bottom left
corner) at 400,75 as defined in
the graphic field.
D e f i n i n g t h e G r a p h i c H e a d e r
Every graphic packet must contain a graphic header. This is the
first thing you enter. It identifies and provides important
measurement and formatting information for the graphic. Bitmap,
duplicate, next-bitmap, constant text, line, and box fields follow
the graphic header, if they are used.
Syntax {G,graphID,action,device,units,row,col,
mode,"name"
p
G1. G Graphic Header.
G2. graphID Unique number from 1 to 999 (1 to 99 for 9403) to identify the
graphic image.
G3. action Enter A to add the graphic to the printer.
Creating Graphics 5-13