Axel AX3000 65 User's Manual - firmware 0632 - Manual (Page 126)

Installing under UNIX/LINUX
112
AX3000 - User's Manual
or a partial set-up can also be obtained (only used set-up parameters are sent):
# rsh axname setup_get_lite > /tmp/axel
Where:
- axname : AX3000 name (/etc/hosts) or IP address,
- setup_get : command for getting the whole set-up,
- setup_get_lite : command for getting the partial set-up.
For more information about these commands, refer to Chapter 10.
d) Setting-Up the AX3000
The contents of a file is used to set-up the AX3000:
# rsh axname setup_send password < /tmp/axel
Where:
- axname : AX3000 name (/etc/hosts) or IP address,
- setup_send : command for set-up the AX3000,
- password : specify the set-up password if set.
For more information about this command, refer to Chapter 10.
e) Downloading Firmware
To download an AX3000 firmware through TFTP:
# rsh axname ax_download password /axfirm/axel 192.168.1.2 192.168.1.1
To download an AX3000 firmware through BOOTP and TFTP:
# rsh axname ax_download password
Where:
- axname : AX3000 name (/etc/hosts) or IP address,
- ax_download : command for firmware downloading,
- password
: specify the set-up password if set.
- /axfirm/axel : path and name of the firmware file,
- 192.168.1.2 : TFTP Server IP address,
- 192.168.1.1 : optional router IP address.