Axel AX3000 65 User's Manual - firmware 0632 - Manual (Page 57)

Interactive Set-Up
AX3000 - User's Manual
43
Maximum number of connected USB devices:
- Two keyboards and barcode readers,
- Two mice,
- Two HUBs,
- Four printers or USB-RS232 adaptors,
- One touch screen.
- One mass storage device,
- Four smartcard readers.
3.4.2 - Connecting a USB Keyboard
The USB keyboard is automatically detected by the Axel terminal.
The USB keyboard settings (nationality, LED initialisation...) are displayed and
can be changed in the AX3000’s General Parameters. For more information
see Chapter 3.2.1.
Note: multiple keyboards (USB and/or PS2) can be connected. The same
settings are used for both and they can be used simultaneously.
3.4.3 - Connecting a USB Barcode Reader
The USB barcode reader is automatically detected by the Axel terminal. A
barcode reader is treated as a keyboard. See previous chapter.
3.4.4 - Connecting a Mouse
A USB mouse is automatically detected by the Axel terminal. No specific
settings are required.
Note: multiple mice (USB and/or PS2) can be used simultaneously.
3.4.5 - Connecting a HUB
A USB HUB is automatically detected by the Axel terminal. No specific settings
are required.