Axel AX3000 65 User's Manual - firmware 0632 - Manual (Page 53)

Interactive Set-Up
AX3000 - User's Manual
39
b) Touch Screens
"Touch screen events" are automatically remapped into "mouse events". No
additional drivers or settings are required on the server (Windows, Unix/Linux,
AS/400...).
Touch screen parameters:
- Port: serial touch screen port (Aux1, Aux2...)
For a USB touch screen this parameter is disabled
- Settings: press <Space>. The displayed box depends on the touch
screen type:
Serial Touch Screen: USB Touch Screen:
Type (serial touch screens only): select the touch screen manufacturer:
ELOTouch, MicroTouch or Liyitec.
Automatic Detection (serial touch screens only): press <Space> to
automatically obtain the set-up parameters from the touch-screen. To detect
these settings the Axel terminal scans a range of baud rates and data formats.
When these match the touch screen settings the serial line parameters are
updated.
Calibration: press <Space> to display a dialog box for calibration. (Follow the
instructions and touch the screen where '*'s are displayed).
Events sent (USB touch screens only): two modes are available:
- Click Only: a 'mouse click' event is sent when the screen is touched
- All: in addition of the click event, 'mouse motion' events are sent until the
screen is untouched.
Transpose X/Y Axis (USB touch screens only): select 'yes' or 'no'.