Axel AX3000 65 User's Manual - firmware 0632 - Manual (Page 209)

Installing under Windows
AX3000 - User's Manual
195
3. The Windows server doesn't convert a temporary license to a 'standard'
license. The server must be updated:
- For Windows 2003, install Service Pack 1.
- For Windows 2000, please consult
http://support.microsoft.com/default.aspx?scid=kb;en-us;827355
8.6 - MANAGING PRINTERS
Auxiliary ports (2 serial and 1 parallel) and logical ports (USB and TCP) are
provided by the AX3000. These ports are independently controlled so multiple
printers can be attached to the AX3000.
The AX3000 offers an embedded LPD protocol. This protocol is available in
most operating systems and allows one or more printers connected to the
AX3000 to be accessed as network printers. (I.e. these printers are controlled
through the spooler and are available for all authorised users).
Note: Windows 2000 and 2003 support RDP printer redirection. The same
printer can be handled with both LPD and RDP redirection protocols.
The main characteristics of these protocols are:
LPD Protocol: (Server level printer)
- The printer must be added to the Windows spooler by the administrator.
- The printer name is static.
- The printer is available when the terminal is powered-on and can be
accessed by any user.
- The printer dataflow is not compressed.
- The display and printer data flows are multiplexed by TCP/IP.
RDP/ICA Protocol: (Client level printer)
- The printer is automatically created when the session is established.
- The printer name is static: "terminal name / printer name / session X" (the
session number can varied).
- The printer is only available when the session is established. This printer
is the user default printer. This printer is not "seen" by other users.