Axel AX3000 65 User's Manual - firmware 0632 - Manual (Page 97)

Installing under UNIX/LINUX
AX3000 - User's Manual
83
- Custom: any character can be replaced by the Euro symbol within
the current character set (use the decimal notation to enter the
Euro ASCII code).
- <Scroll Lock> & <Pause>: enable or disable these two keys
- End Sequence: to stop transparent printing mode
- Init String: this character string is sent when the session (telnet or tty) is
established.
- Answer Back: session identifier (10 character max.).
- Monitor Mode: the monitor mode is used to examine the data received
by the AX3000:
- No: monitor mode disabled.
- Yes, hexadecimal value
- Yes, symbol
- Remote Terminal Set-Up: enable or disable the use of escape
sequences to set terminal parameters from the host computer.
- Enhanced Screen Mode: enable or disable the display of double-size
characters or colour underline attribute.
- Blink Allowed: if blink attribute is disabled, 16 background colours can
be used (instead of the 8 normally available).
- Mouse Allowed: enable/disable the mouse within this session.
- Nulls Suppress (WYSE emulation only): if 'yes', bytes with ASCII code
set to zero are skipped.
b) Programmable Keys
This dialog box allows certain keys to be remapped. This function is only
available in keyboard ASCII mode.
Note: to remap keys not shown below use the "Programmable Sequences"
function described in the next chapter.