Axel AX3000 65 User's Manual - firmware 0632 - Manual (Page 144)

Installing under OS/400
130
AX3000 - User's Manual
Example 1: Screen session, character mode
When this EBCDIC data is received:
@%@1/1Bat/2F@%@
(44 6C 44 F1 61 F1 C2 81 A3 61 F2 C6 44 6C 44)
This ASCII data is sent to the AUX1 port:
<ESC>at/ (1B 61 74 2F)
Example 2: Printer Session, character mode
When this EBCDIC data is received:
@%@/1Bat/2F@%@
(44 6C 44 F1 61 F1 C2 81 A3 61 F2 C6 44 6C 44)
This ASCII data is sent to the auxiliary port of this printer session:
<ESC>at/ (1B 61 74 2F)
e) Handling DTR and RTS Signals
The transparent mode can also be used to control, from a screen session, DTR
and RTS output signals.
The command syntax is the following:
@DTR Port Action
@RTS Port Action
Where:
Port: port numbers are listed in sub-section b
Action: signal is low if this value is 0. Else signal is high.
6.3 - 5250 PRINTER
Auxiliary ports (2 serial and 1 parallel) and logical ports (USB and TCP) are
provided by the AX3000. These ports are independently controlled so multiple
printers can be attached to the AX3000.