Axel AX3000 65 User's Manual - firmware 0632 - Manual (Page 152)

Installing under OS/400
138
AX3000 - User's Manual
For more information about this command, refer to Chapter 10.
e) Downloading a Firmware
To download an AX3000 firmware through TFTP:
===> RUNRMTCMD CMD('AX_DOWNLOAD password /axfirm/ax3000 192.168.1.180')
RMTLOCNAME('192.168.1.241' *IP)
To download an AX3000 firmware through BOOTP and TFTP:
===> RUNRMTCMD CMD('AX_DOWNLOAD password /axfirm/ax3000 192.168.1.180')
Parameters of the RUNRMTCMD command:
- AX_DOWNLOAD : Command for firmware downloading,
- password
: Required if the set-up is password-protected,
- /axfirm/ax3000 : Path and name of the firmware file,
- 192.168.1.180 : AS/400 IP address,
- 192.168.1.241 : AX3000 IP address.
Messages are displayed on the target AX3000 (See Chapter 11.4).
f) Editing AX3000 Statistics
Some AX3000 statistics can be obtained by invoking the following command:
===> RUNRMTCMD CMD(AX_GETSTAT) RMTLOCNAME('192.168.1.241' *IP)
Where:
- AX_GETSTAT : Command for getting statistics,
- 192.168.1.241 : AX3000 IP address.
6.5 - FURTHER OPTIONS
6.5.1 - Turning-Off the AX3000
Care should be taken before turning off the TCP/IP AX3000 as the AS/400
cannot detect a TCP/IP device being turned-off). For graceful terminal
shutdown use the <Ctrl><Alt><Del> keystroke combination.