Axel AX3000 65 User's Manual - firmware 0632 - Manual (Page 77)

Interactive Set-Up
AX3000 - User's Manual
63
The 'time-out' parameter is the maximum number of seconds allowed for the
terminal to load a new firmware/configuration. If nothing is received in this time
the terminal boots up using existing current settings.
Two methods are available for the terminal to locate the AxRM server (IP
address and TCP port):
- Static: the IP address (or the name) and the TCP port are entered
- Dynamic (only if DHCP is already used to get the terminal IP address):
the IP address and TCP port are given through the DHCP protocol (see
Chapter 2.2.3 for more information).
For more information about Auto-Configuration stages, refer to Chapter 2.2.