Axel AX3000 65 User's Manual - firmware 0632 - Manual (Page 284)

Appendix
270
AX3000 - User's Manual
Tftp AX3000 Errors:
tftp errno: xxx
- xxx is the error number.
Possible errors:
10: Ethernet board not responding.
11: no response to the tftp broadcast request (the tftp host is unreachable
or not correctly set-up).
12: network error.
13: the firmware file does not correspond to AX3000 firmware or is not
compatible with the AX3000 model.
14: the firmware file size is less than 256 bytes. This indicates that the file
is not an AX3000 firmware file.
15: checksum error on the firmware file.
AX3000 Flash Memory Errors:
flash errno: xxx
- xxx is the error number.
Possible errors:
0: flash erasing failure
1: flash programming failure
2: checksum error (invalid firmware file)
3: segment descriptor programming failure
A.10 - MORE INFORMATION...
A.10.1 - Reload Factory Settings
The menu [Configuration]-[Advanced]-[More]-[Factory Settings] allows,
after confirmation, terminal factory settings to be reloaded. The current
configuration is lost.
On next boot, the Quick Set-Up will be displayed and the Auto-Configuration
service will be started (see Chapter 2).