Axel AX3000 65 User's Manual - firmware 0632 - Manual (Page 174)

Installing under Windows
160
AX3000 - User's Manual
Example: %SystemRoot%\system32\cmd.exe
- Working Directory (available only if 'Auto-Run' is set to 'yes'): sets
program working directory.
Example: D:\
8.1.4 - Redirected Resources
The redirected resources mechanism allows one or more local resources to be
'published' to the Windows server. These resources are available only for the
terminal's user. They are created on the Windows server when the connection
is established and removed when the session is disconnected.
The following local resources are supported:
- Printers: before being redirected each printer must be declared at the
'physical connection port' level. See first sub-section a) then c).
- COM ports before being redirected each port must be declared at the
physical port level. See first sub-section b) then c).
- Mass storage devices: see sub-section c).
- Smartcard readers: see sub-section c)
a) Declaring a Redirected Printer
At the RDP/ICA connection time a redirected printer will be automatically added
to the Windows spooler. It will be removed when the session disconnects.
Before being redirected an RDP/ICA printer must be declared at the 'physical
connection port' level. The available ports are: auxiliary ports (parallel, Aux1
and Aux2), USB and network logical ports.