Axel AX3000 65 User's Manual - firmware 0632 - Manual (Page 225)

Remote Administration
AX3000 - User's Manual
211
10.1.1 - Configuring
To set-up the remote control function, select the menu [Configuration]-
[Advanced]-[Tuning]. Within the displayed dialog box select 'Remote Control'
and press <Space>. The following dialog box is displayed:
The parameters are:
- User's Authorization Required: when this parameter is set the remote
control must be allowed by the current user of the terminal.
- Tcp Port: (default: 4098)
- Password (optional): this password will be requested when the
connection will be established.
10.1.2 - Using
Use AxRM to take the control of the terminal.
10.2 - TELNET INTERACTIVE SET-UP
The AX3000 interactive set-up can be accessed through a telnet session. A
specific TCP port is used.
The default value of this TCP port is 4096. This value can be changed. (Select
[Configuration]-[Advanced]-[Tuning] and set "telnet set-up tcp port").
We strongly advise to use AxRM to open the telnet setup. But any telnet client
can open a set-up session to the AX3000. The prerequisite of the telnet client
is:
- ANSI emulation (with color support)
- TERM value: ansi