Axel AX3000 65 User's Manual - firmware 0632 - Manual (Page 75)

Interactive Set-Up
AX3000 - User's Manual
61
Note about mass storage devices:
- When a mass storage device is currently in use, a colored indicator is
displayed on the right (green: read in progress, red: write in progress).
It's strictly forbidden to remove a USB device when currently in use.
- When the mode "Read/Write" is selected (see Chapter 3.2.4), the status
line can't be disabled.
3.7.1 - OTHER FUNCTIONS
3.7.1 - Password
Access to the set-up menus can be controlled by a password.
a) Setting the Password
Select the [Configuration]-[Advanced]-[Password] dialog box to set, change
or delete the set-up password:
Enter the following parameters:
- Enter a new password: enter a new password of maximum five
characters, or press <CR> if no password is required or to delete existing
password.
- Retype password: re-enter the identical password.