Super Systems 20Q - Manual (Page 112)

108
Deviation alarm Deviation alarm Deviation alarm Deviation alarm Deviation alarm
Operative mode
Operative mode Operative mode Operative mode Operative mode: High or low programmable.
Threshold
Threshold Threshold Threshold Threshold: programmable from - 1000 to +1000 digits.
Hysteresis
Hysteresis Hysteresis Hysteresis Hysteresis: programmable in engineering units from 1 to 200
digits.
Alarm on the main output value
Alarm on the main output value Alarm on the main output value Alarm on the main output value Alarm on the main output value
It is possible to obtain an alarm condition when the main control
output is lower or higher than a programmed value.
Operative mode
Operative mode Operative mode Operative mode Operative mode: Minimum or maximum programmable.
Threshold
Threshold Threshold Threshold Threshold: programmable from 0.1 to 100.0 % of the output.
Hysteresis
Hysteresis Hysteresis Hysteresis Hysteresis: programmable from 0.1 to 20.0 %.
Alarm on the secondary output value Alarm on the secondary output value Alarm on the secondary output value Alarm on the secondary output value Alarm on the secondary output value
It is possible to obtain an alarm condition when the secondary
control output is lower or higher than a programmed value.
Operative mode
Operative mode Operative mode Operative mode Operative mode: Minimum or maximum programmable.
Threshold
Threshold Threshold Threshold Threshold: programmable from 0.1 to 100.0 % of the output.
Hysteresis
Hysteresis Hysteresis Hysteresis Hysteresis: programmable from 0.1 to 20.0 %.
EVENTS EVENTS EVENTS EVENTS EVENTS
All digital outputs are programmable as events.
In this case they are used as input error annunciator or as
instrument status indicator.
Event type:
- Error condition on the main input (overrange, underrange, open
or short circuit).
- Error condition on the auxiliary input.
- Error condition on both inputs.
- Auto/Man mode annunciator
- Local/remote set point annunciator.
AUXILIARY POWER SUPPLY AUXILIARY POWER SUPPLY AUXILIARY POWER SUPPLY AUXILIARY POWER SUPPLY AUXILIARY POWER SUPPLY
Type:
Type: Type: Type: Type: 24 V DC + 20% not isolated.
Max. current: 25 mA.
mkc-ssi.pmd 06/07/2004, 12.20 108