Super Systems 20Q - Manual (Page 43)

CnF. 2CnF. 2CnF. 2CnF. 2CnF. 2
39
- OUT 5 range - [C.E08] - OUT 5 range - [C.E08] - OUT 5 range - [C.E08] - OUT 5 range - [C.E08] - OUT 5 range - [C.E08]
This parameter will be available only when Out 5 is configured
("O5.Fn" [C.E07] different from "nonE")
Range: 0-20 = 0
÷ 20 mA
4-20 = 4 ÷ 20 mA
- OUT 5 retransmission initial scale value - OUT 5 retransmission initial scale value - OUT 5 retransmission initial scale value - OUT 5 retransmission initial scale value - OUT 5 retransmission initial scale value
- [C.E09] - [C.E09] - [C.E09] - [C.E09] - [C.E09]
This parameter will be available only when Out 5 function [C.E07]
is configured as “PV.rt” or “SP.rt”
Range: From -1999 to 9999
NOTE
NOTE NOTE NOTE NOTE: Decimal point is positioned as previously selected at
“CnF.1 - ñ.In.d” [C.d03])
- OUT 5 retransmission full scale value - OUT 5 retransmission full scale value - OUT 5 retransmission full scale value - OUT 5 retransmission full scale value - OUT 5 retransmission full scale value
- [C.E10] - [C.E10] - [C.E10] - [C.E10] - [C.E10]
This parameter will be available only when Out 5 function [C.E07]
is configured as “PV.rt” or “SP.rt”
Range: From -1999 to 9999
NOTE
NOTE NOTE NOTE NOTE: Decimal point is positioned as previously selected at
“CnF.1 - ñ.In.d” [C.d03])
- OUT 5 filter on the retransmitted value - OUT 5 filter on the retransmitted value - OUT 5 filter on the retransmitted value - OUT 5 filter on the retransmitted value - OUT 5 filter on the retransmitted value
- [C.E11] - [C.E11] - [C.E11] - [C.E11] - [C.E11]
This parameter will be available only when OUT 5 is configured
as process variable retransmission ("O5.Fn" [C.E07] is equal to
“PV.rt”).
Range: From 0 (no filter) to 8 seconds
NOTE
NOTE NOTE NOTE NOTE: this is a first order digital filter applied to the retransmit-
ted output value.
- OUT 6 function - [C.E12] - OUT 6 function - [C.E12] - OUT 6 function - [C.E12] - OUT 6 function - [C.E12] - OUT 6 function - [C.E12]
Range: nonE = Output not used
ñAin = Main control output (linear)
SECn = Secondary control output (linear)
PV.rt = Process variable retransmission
SP.rt = Operative set point retransmission
NOTE NOTE NOTE NOTE NOTE: When the option circuitry is not mounted the middle
display will show “no.Pr” (not present).
mkc-ssi.pmd 06/07/2004, 12.19 39