Super Systems 20Q - Manual (Page 97)

Gr.dFGr.dFGr.dFGr.dFGr.dF
93
Run time group 9 [R.Ixx] Run time group 9 [R.Ixx] Run time group 9 [R.Ixx] Run time group 9 [R.Ixx] Run time group 9 [R.Ixx]
OPTIONAL OUTPUT SETTING
R.I01 - OUT 10 setting R.I01 - OUT 10 setting R.I01 - OUT 10 setting R.I01 - OUT 10 setting R.I01 - OUT 10 setting
This parameter is available when optional output circuitry is
fitted.
Upper display: Gr.9
Lower display: Ou.10
Range: OFF = Relay deenergized
On = Relay energized
For OUT 11 up to OUT 19, the instrument will show on the lower
display the related output and it is possible to perform the same
setting as above described.
R.I02 - All relays deenergization R.I02 - All relays deenergization R.I02 - All relays deenergization R.I02 - All relays deenergization R.I02 - All relays deenergization
This parameter is available when optional output circuitry is
fitted.
Upper display: Gr.9
Lower display: dEEn
Range: OFF = No action
On = All relays will be deenergized
Run time group "dF" [r.Ixx] Run time group "dF" [r.Ixx] Run time group "dF" [r.Ixx] Run time group "dF" [r.Ixx] Run time group "dF" [r.Ixx]
DEFAULT RUN TIME PARAMETER LOADING.
- Default run time parameter loading - - Default run time parameter loading - - Default run time parameter loading - - Default run time parameter loading - - Default run time parameter loading -
[r.I01] [r.I01] [r.I01] [r.I01] [r.I01]
Default run time parameter loading of all run time parameters (all
groups exception made for group 8).
Range: OFF = No loading data
On = the run time parameters of all groups (exception
made for group 8) will be forced to their default
values.
mkc-ssi.pmd 06/07/2004, 12.19 93