Super Systems 20Q - Manual (Page 75)

71
Run time group 1 [r.Axx] Run time group 1 [r.Axx] Run time group 1 [r.Axx] Run time group 1 [r.Axx] Run time group 1 [r.Axx]
Set point VALUES
- Main set point - [r.A01] - Main set point - [r.A01] - Main set point - [r.A01] - Main set point - [r.A01] - Main set point - [r.A01]
Range: from "rL" [r.E12] to "rH" [r.E13].
- Set point 2 - [r.A02] - Set point 2 - [r.A02] - Set point 2 - [r.A02] - Set point 2 - [r.A02] - Set point 2 - [r.A02]
This parameter is available only when one of the logic inputs is
configured for SP/SP2 selection
Range: from "rL" [r.E12] to "rH" [r.E13].
- Set point 3 - [r.A03] - Set point 3 - [r.A03] - Set point 3 - [r.A03] - Set point 3 - [r.A03] - Set point 3 - [r.A03]
This parameter is available only when one of the logic inputs is
configured for SP3/SP4 selection.
Range: from "rL" [r.E12] to "rH" [r.E13].
- Set point 4 - [r.A04] - Set point 4 - [r.A04] - Set point 4 - [r.A04] - Set point 4 - [r.A04] - Set point 4 - [r.A04]
This parameter is available only when one of the logic inputs is
configured for SP/SP2 selection and another one for SP3/SP4
selection.
Range: from "rL" [r.E12] to "rH" [r.E13].
- Group 1 default data loading - [r.A05] - Group 1 default data loading - [r.A05] - Group 1 default data loading - [r.A05] - Group 1 default data loading - [r.A05] - Group 1 default data loading - [r.A05]
Range: OFF = No loading data
ON = Loading data
Gr.1Gr.1Gr.1Gr.1Gr.1
mkc-ssi.pmd 06/07/2004, 12.19 71