Super Systems 20Q - Manual (Page 39)

CnF. 1CnF. 1CnF. 1CnF. 1CnF. 1
35
- Auxiliary input type - Auxiliary input type - Auxiliary input type - Auxiliary input type - Auxiliary input type - [C.d10] - [C.d10] - [C.d10] - [C.d10] - [C.d10]
This parameter will be skipped when the auxiliary input option is
not mounted or "A.In.F" (auxiliary input function [C.d09]) is equal
to "nonE".
Range: 0-20
= 0 − 20 mA
4-20 = 4 − 20 mA
0- 5 = 0 − 5 V
1- 5 = 1 − 5 V
0-10 = 0 − 10 V
2-10 = 2 − 10 V
- Initial scale read-out of the auxiliary - Initial scale read-out of the auxiliary - Initial scale read-out of the auxiliary - Initial scale read-out of the auxiliary - Initial scale read-out of the auxiliary
i n p u t i n p u t i n p u t i n p u t i n p u t - [C.d11] - [C.d11] - [C.d11] - [C.d11] - [C.d11]
This parameter is available only when auxiliary input is configured
Range: from -1999 to 9999
NOTE
NOTE NOTE NOTE NOTE: the decimal point will be automatically positioned as
selected for the main input.
- Full scale read-out of the auxiliary - Full scale read-out of the auxiliary - Full scale read-out of the auxiliary - Full scale read-out of the auxiliary - Full scale read-out of the auxiliary
i n p u t i n p u t i n p u t i n p u t i n p u t - [C.d12] - [C.d12] - [C.d12] - [C.d12] - [C.d12]
This parameter is available only when auxiliary input is configured
Range: from -1999 to 9999
NOTE
NOTE NOTE NOTE NOTE: the decimal point will be automatically positioned as
selected for the main input.
- Filter on auxiliary input - [C.d13] - Filter on auxiliary input - [C.d13] - Filter on auxiliary input - [C.d13] - Filter on auxiliary input - [C.d13] - Filter on auxiliary input - [C.d13]
This parameter is available only when auxiliary input is configured
Ranges: from 0 (no filter) to 8 seconds.
NOTE
NOTE NOTE NOTE NOTE: this is a first order digital filter applied to the measured
value made by the auxiliary input.
- Auxiliary input activation mode - - Auxiliary input activation mode - - Auxiliary input activation mode - - Auxiliary input activation mode - - Auxiliary input activation mode -
[C.d14] [C.d14] [C.d14] [C.d14] [C.d14]
This parameter is available only when auxiliary input is configured
Range: norñ = The auxiliary input activation is controlled by
external contact, front key or serial link
Cnd.A = The auxiliary input activation is controlled by its
status (The device works with local set point
when auxiliary input is out of range, while it
works with remote set point (or bias) when it is
within range)
mkc-ssi.pmd 06/07/2004, 12.19 35