Super Systems 20Q - Manual (Page 17)

13
NOTES NOTES NOTES NOTES NOTES 1) To avoid electrical shock, connect power line at
the end of the wiring procedure.
2) For power connections use No 16 AWG or larger wires
rated for at last 75 °C.
3) Use copper conductors only.
4) Don’t run input wires together with power cables.
5) This output is not fuse protected. Please, provide it
externally using a fuse with a I 2 t equal to128.
23
Load
24
Line
26
Load
27
Line
OUT 1
OUT 2
E.3) TRIAC OUTPUTS E.3) TRIAC OUTPUTS E.3) TRIAC OUTPUTS E.3) TRIAC OUTPUTS E.3) TRIAC OUTPUTS
Fig. 14 TRIAC OUTPUT WIRING
Switching mode Switching mode Switching mode Switching mode Switching mode: isolated zero crossing type.
Rated current
Rated current Rated current Rated current Rated current: from 50 mA to 1 A.
Rated voltage
Rated voltage Rated voltage Rated voltage Rated voltage: from 24 V
RMS
to 240 V
RMS
-10 % +15 % (50/60Hz)
Load type Load type Load type Load type Load type: resistive load only
mkc-ssi.pmd 06/07/2004, 12.19 13