H3C Technologies H3C S10500 Series Switches - Manual (Page 254)

239
[SwitchA-bgp] quit
# Configure Switch B.
[SwitchB] bgp 65009
[SwitchB-bgp] router-id 2.2.2.2
[SwitchB-bgp] peer 3.1.1.2 as-number 65008
4. Configure BGP and IGP synchronization.
• Configure BGP to redistribute routes from OSPF on Switch B, so that Switch A can obtain the route
to 9.1.2.0/24.
• Configure OSPF to redistribute routes from BGP on Switch B, so that Switch C can obtain the route
to 8.1.1.0/24.
# Configure BGP to redistribute routes from OSPF on Switch B.
[SwitchB-bgp] import-route ospf 1
[SwitchB-bgp] quit
[SwitchB] ospf 1
[SwitchB-ospf-1] import-route bgp
[SwitchB-ospf-1] quit
# Display the BGP routing table on Switch A.
[SwitchA] display bgp routing-table
Total Number of Routes: 3
BGP Local router ID is 1.1.1.1
Status codes: * - valid, ^ - VPNv4 best, > - best, d - damped,
h - history, i - internal, s - suppressed, S - Stale
Origin : i - IGP, e - EGP, ? - incomplete
Network NextHop MED LocPrf PrefVal Path/Ogn
*> 3.3.3.3/32 3.1.1.1 1 0 65009?
*> 8.1.1.0/24 0.0.0.0 0 0 i
*> 9.1.2.0/24 3.1.1.1 1 0 65009?
# Display the routing table on Switch C.
[SwitchC] display ip routing-table
Routing Tables: Public
Destinations : 9 Routes : 9
Destination/Mask Proto Pre Cost NextHop Interface
2.2.2.2/32 OSPF 10 1 9.1.1.1 Vlan300
3.3.3.3/32 Direct 0 0 127.0.0.1 InLoop0
8.1.1.0/24 O_ASE 150 1 9.1.1.1 Vlan300
9.1.1.0/24 Direct 0 0 9.1.1.2 Vlan300
9.1.1.2/32 Direct 0 0 127.0.0.1 InLoop0
9.1.2.0/24 Direct 0 0 9.1.2.1 Vlan400
9.1.2.1/32 Direct 0 0 127.0.0.1 InLoop0
127.0.0.0/8 Direct 0 0 127.0.0.1 InLoop0