ProSoft Technology 5105-103M-PDPS - Manual (Page 63)

5105-103M-PDPS ♦ ProLinx Gateway Diagnostics and Troubleshooting
IEC 60870-5-103 Master to PROFIBUS Slave Gateway User Manual
ProSoft Technology, Inc. Page 63 of 144
November 24, 2010
Sample Diagnostics reported to master.
Translated as follows:
Extended diagnostics length 0E= 14 bytes, Product Version 56 = "V", 30 =
"0", 31 = "1", 2E = ".", 30 = "0", 35 = "5", Product Name 50 = ""P", 44 = ""D", 53
= "S", 34 = "4" (MVI46),
Status Register [0] 41 = SPC3 in passive idle and WD-State is in DP_Control
State, Status Register [1] 03 = 1.5 Baud rate, Module State 04 = not in data
exchange
2.4.3 Viewing PROFIBUS Status
Enable State
Indicates the initialized state of the 5105-103M-PDPS module.

0 = Module is not initialized

1 = Module is initialized
Module State
Indicates the current state of the 5105-103M-PDPS module.

0 = Normal Operation

1 = Shutdown

2 = File Transfer

3 = SPC3 ASIC problem

4 = Not in data exchange