ProSoft Technology 5105-103M-PDPS - Manual (Page 96)

Reference 5105-103M-PDPS ♦ ProLinx Gateway
User Manual IEC 60870-5-103 Master to PROFIBUS Slave Gateway
Page 96 of 144 ProSoft Technology, Inc.
November 24, 2010
Port 0 Status
Offset Name Description
14010 State This word contains the state machine value for the
channel.
14011 Cmd Req This word contains the number of commands transferred
out the channel.
14012 Cmd Resp This word contains the number of command response
messages received on the channel.
14013 Cmd Err This word contains the number of command errors
recognized on the channel.
14014 Requests This word contains the total number of messages
transmitted on the channel.
14015 Responses This word contains the total number of messages
received on the channel.
14016 Err Sent This word contains the number of error messages sent on
the channel.
14017 Err Received This word contains the number of error messages
received on the channel.
14018 Cfg Error This bit-mapped word recognizes any configuration errors
for the channel. Refer to the configuration error word table
for a definition of each bit.
14019 Current Error This word contains the error code for the current
command executing on the channel.
14020 Last Error This word contains the error code for the last error
recognized on the channel.
14021 to
14029
Reserved Not used at this time
The following table defines the contents of the configuration error word. Each bit
in the word corresponds to an error condition recognized when the module is
configured. There is a separate word for each application port. This data is
reported in the status data area previously defined.