Canon EOS R5 C VR Creator Kit with RF 5.2mm f/2.8 Dual Fisheye Lens - Manual (Page 118)

S pecial Recording Mode s
118
Continuou s Recording
Audio and video are recorded on both cards in this mode, normal recording on card 1, and continuous recording
on card 2. This function can be used when the main recording format is set to MP4. Video will be recorded in
MP4 format and audio will be recorded in linear PCM format.
With the exception of step 5, you can also use direct touch control to perform this function (
A
56).
1 In s ert a card into each card s lot ( s lot 1 for normal recording, s lot 2 for continuou s recording).
2 S elect > [
Æ
Recording/Media S etup] > [Recording Mode] > [ Main / Continuou s Rec].
• The continuous recording mode is activated and [CONT] appears on the screen next to the card 2 indicator.
3 S elect > [
Æ
Recording/Media S etup] > [Continuou s Recording] > [REC].
• The tally lamp changes from green (power indicator) to red and continuous recording starts on card 2. The
onscreen display changes to [
Ü
CONT].
4 Pre ss the REC button to s tart recording.
• Normal recording on card 1 starts.
• If you press the button before step 3, recording will start on both cards.
5 S elect > [
Æ
Recording/Media S etup] > [Continuou s Recording] > [ S TBY].
• The tally lamp changes from red to green (power indicator) and recording stops on both cards. The
onscreen display changes to [CONT].
6 S elect > [
Æ
Recording/Media S etup] > [Recording Mode] > [Normal Recording] to turn off
continuou s recording.
NOTES NOTES
• When continuous recording is activated, if recording on card 2 (continuous recording) is not available, normal
recording will not be possible either.
• Continuous recording will continue even if card 1 becomes full.
• If [Continuous Recording] is set to [STBY] and the main recording format is changed to an option other than
MP4, continuous recording will be canceled.