Canon EOS R5 C VR Creator Kit with RF 5.2mm f/2.8 Dual Fisheye Lens - Manual (Page 195)

195
Menu Option s
[Ctrl Dial in Menus] [Disable], [Enable] (
A
22)
Enables or disables the use of the front and top control dials to navigate the setup menus, direct touch
control, direct setting mode and status screens.
[Focus Ring Operation] [Enable During AF] , [Disable During AF]
[Focus Ring Direction] [Reverse], [Normal]
Changes the direction of the adjustment when operating the focus ring on an RF lens.
[Focus Ring Response] [Varies with Rotation Speed] , [Linked to Rotation Degree]
[Keep Key Lock at Shutdown] [On], [Off] ( A 25)
[Key Lock] [All Buttons], [All Except REC Button] ( A 25)
[REC Button] [Disable], [Enable] ( A 47)
Enables or disables the use of the REC buttons.
[Assign. Button 10 as REC],
[Assign. Button 13 as REC] [On], [Off] ( A 121)
This setting turns assignable button 10/13 to an alternative REC button.
[Onscreen REC/STBY Button] [On], [Off] (
A
47)
When this setting is set to [On], the recording operation indicator (REC/STBY) on the CAMERA mode
screen becomes an onscreen button you can touch to start/stop recording.
[Touch Screen Response] [Normal] , [Low] ( A 1 9 )
[Tally Lamp],
[Card Access LED] [On] , [Off]
These settings determine whether the following LEDs and indicators will illuminate.
[Tally Lamp]: The tally lamp (
A
12) when the camera starts up and while recording.
[Card Access LED]: The card access indicator ( A 34) when the camera is accessing the card.
[Fan Mode] [Automatic], [Always On] ( A 43)
[Fan Speed (STBY)] [Maximum], [High], [Middle], [Low]
[Fan Speed (REC)],
[Fan Speed (Always)], [Fan Speed] [High], [Middle], [Low]
[Review Recording] [Entire Clip] , [Last 4 sec] (
A
55)
[GPS Auto Time]
2
[On], [Off]
When this setting is set to [On], the camera automatically adjust its date and time settings according to
the information received from the GPS signal.
• While the automatic date/time adjustment is activated, the
> [
B
System Setup] > [Date/
Time] setting will not be available.
• The time will not be updated while recording video.
[USB Mode] [Video Output (UVC)], [Canon App(s) for iPhone], [PTP Connection/GP-E2] ( A 120)
Select [PTP Connection/GP-E2] when connecting the GP-E2 GPS Receiver to the camera's accessory
shoe.
[Retract Lens] [On] , [Off]
When a compatible lens (
A
235) is attached to the camera and the focus mode switch on the lens is set
to AF, if this setting is set to [On], the lens will retract fully when the camera is turned off.
When this setting is set to [On], turning off the camera will move the focus position. To prevent this, set
this setting to [Off]. Note that there is no guarantee that the focus position will not move, so checking the
focus position is recommended when turning on the camera.
[Shutter at Shut Down] [Close] , [Open]
This setting allows you to choose whether the shutter closes or remains open when the power switch is
set to OFF.
• The [Close] setting is recommended during normal use in order to protect the camera's sensor from
dust or dirt when changing lenses.
• Select the [Open] setting when you want to reduce the sound caused by setting the power switch from
VIDEO to OFF or from OFF to VIDEO.
Menu item Setting options and additional information