Canon EOS R5 C VR Creator Kit with RF 5.2mm f/2.8 Dual Fisheye Lens - Manual (Page 217)

217
Trouble s hooting
Nearby electronic device s
- If the tran s mi ss ion rate over a Wi-Fi networ k drop s becau s e of interference from the following electronic device s ,
s witching to the 5 GHz band or to a different channel may s olve the problem.
- Wi-Fi networ ks u s ing the IEEE 802.11b/g/n protocol operate in the 2.4 GHz band. For thi s rea s on, the tran s mi ss ion
rate may drop if there are nearby microwave oven s , cordle ss telephone s , wirele ss microphone s and Bluetooth or
s imilar device s operating on the s ame frequency band.
- If another acce ss point operating on the s ame frequency band a s the Wi-Fi adapter connected to the camera i s u s ed
nearby, the tran s mi ss ion rate may drop.
U s ing multiple camera s /Wi-Fi adapter s /acce ss point s
- Chec k that there are no IP addre ss conflict s among the device s connected to the s ame networ k .
- If multiple camera s are connected to a s ingle acce ss point, connection s peed s may be reduced.
- To reduce radio wave interference when there are multiple acce ss point s u s ing IEEE 802.11b/g or IEEE 802.11n (in the
2.4 GHz band), leave a gap of four channel s between each wirele ss acce ss point. For example, u s e channel s 1, 6, and
11, channel s 2, 7, and 12, or channel s 3, 8, and 13.
If you can u s e IEEE 802.11a/n/ac (in the 5 GHz band), s witch to IEEE 802.11a/n/ac and s pecify a different channel,
leaving an appropriate gap between channel s according to the wirele ss s tandard and frequency band u s ed. For
example, when u s ing IEEE 802.11ac (VHT80), leave a gap of 8 channel s between acce ss point s .