Minolta Magicolor 3100 Series - Manual (Page 104)

2-104
2.5 Input Test
2.5.1 Executing input test
Click the “Diagnostic Input Test” button, and the following screen will appear.
The screen will vary according to the conditions of the sensors and switches.
The ON or OFF condition of digital sensors and switches can be checked from the color of the indicators on
the left side of each name.
ON: Green OFF: Red
For analog devices, A/D converted values are displayed.
For the relation between A/D converted values and data, refer to the Input Test
Readme.txt file in the folder where the Hanabi Service Commander has been
installed.