Minolta Magicolor 3100 Series - Manual (Page 198)

3-196
RRP6.3 ACTUATOR FULL (PL6.1.5)
Figure: ACTUAOTR FULL Removal
Removal
1) Remove the COVER ASSY FRONT HEAD. (RRP1.2)
2) Deflect the shaft of the ACTUATOR FULL from top portion the CHUTE ASSY OUT (PL6.1.1) of the
printer and extract the shaft of the ACTUATOR FULL from the bearing bore on the left side of the
CHUTE ASSY OUT.
3) Shift the actuator of the ACTUATOR FULL from the hole at the center of the CHUTE ASSY OUT and
pull up the ACTUATOR FULL from the CHUTE ASSY OUT.
Replacement
Replace the components in the reverse order of removal.