Minolta Magicolor 3100 Series - Manual (Page 55)

Chapter 1 Troubleshooting
1-55
FIP-16 Fuser Failure (Call for Service Fuser Failure)
Step Check
Yes No
1
Initial check
Check the following for damage.
FUSER ASY condition
Replace the parts
concerned
Go to step [2]
2
Check FUSER ASSY connector
Disconnect the FUSER ASSY connector, and check for
broken or curved pins.
Go to step [3]
Replace the parts
concerned
3
Check FUSER ASSY
Check if an error occurs though the FUSER ASSY was
replaced with a new one.
Replace PWBA
HNB MCU
End of work