Minolta Magicolor 3100 Series - Manual (Page 212)

3-210
RRP6.14 PLATE ASSY BOTTOM MSI (PL6.1.42)
Figure: PLATE ASSY BOTTOM MSI Removal
Removal
1) Remove the FUSER ASSY. (RRP8.1)
2) Remove the COVER TOP MAIN. (RRP1.4)
3) Remove the COVER ASSY FRONT HEAD. (RRP1.2)
4) Remove the COVER MSI. (RRP1.11)
5) Remove the TRAY ASSY MSI. (RRP1.12)
6) Remove the COVER ASSY FRONT. (RRP1.13)
7) Remove the COVER ASSY FRONT IN. (RRP1.10)
8) Remove the CHUTE ASSY EXIT. (RRP7.1)
9) Remove the COVER SIDE L. (RRP1.14)
10) Remove the COVER SIDE R. (RRP1.9)
11) Remove the STRAP. (RRP8.6)
12) Remove the CHUTE ASSY OUT. (RRP6.1)
13) Remove the SHAFT ASSY ROLL FEED. (RRP6.13)
14) Remove the SPRING N/F MSI (PL6.1.21) and remove the STOPPER SOL. (PL6.1.38)
15) Remove 2 screws securing the PLATE OUT MSI (PL6.1.35) to the CHUTE ASSY OUT (PL6.1.1).
In the following steps, shift the actuator of the ACTUATOR MSI (PL6.1.37) from a bore
in the PLATE BOTTOM MSI (PL6.1.32).
16) Remove the PLATE OUT MSI from the CHUTE ASSY OUT together with the PLATE ASSY BOTTOM
MSI.
17) Remove the PLATE ASSY BOTTOM MSI from the PLATE OUT MSI.
Replacement
Replace the components in the reverse order of removal.