Minolta Magicolor 3100 Series - Manual (Page 245)

Chapter 3 Removal and Replacement Procedures
3-243
RRP10.8 PWBA EEPROM STD (PL10.1.16)
Figure: PWBA EEPROM STD Removal
Removal
1) Remove the FUSER ASSY. (RRP8.1)
2) Remove the BTR UNIT ASSY. (RRP8.4)
3) Remove the COVER TOP MAIN. (RRP1.4)
4) Remove the COVER ASSY FRONT HEAD. (RRP1.2)
5) Remove the COVER MSI. (RRP1.11)
6) Remove the TRAY ASSY MSI. (RRP1.12)
7) Remove the COVER ASSY FRONT. (RRP1.13)
8) Remove the COVER ASSY FRONT IN. (RRP1.10)
9) Remove the COVER SIDE L. (RRP1.14)
10) Remove the connector (P/J144) on the PWBA EEPROM from the left side surface of the printer.
11) Remove 1 screw securing the PWBA EEPROM.
12) Remove the PWBA EEPROM from the printer.
Replacement
Replace the components in the reverse order of removal.